The Transform receives an MxV Bus Enable message and transmits a Boolean enable/disable signal to the appropriate port. The GUID in the input message is matched to the BusId property of the output port.
Use this procedure to set the BusId port properties:
2.Copy the bus GUID from the Identification>GUID property of the CAN or LIN Transmit Driver Transform's outport. You can use Ctrl‑A to select and Ctrl‑C to copy.
Driver Outport Properties
3.Select the output port on the MxV Bus Enable Router.
The port properties are displayed in the Properties box:
Mxv Bus Enable Router Output Port Properties
4.Select the BusId port property and paste (or enter) the GUID of the corresponding bus. You can use Ctrl‑V to paste.
5.Repeat for each output port that is connected to a bus.
See examples at CAN Transmit Driver–Bus Control Signals.