Real-time HIL testing places special demands on your system. For this reason, Danlaw recommends the following configuration:
•Windows 7 or 10
•A processor with 4 or more cores is required
•At least 4GB RAM
•At least 2GHz processor frequency (Some PC specs quote the rated frequency of the processor, but do not operate it at that frequency.)
•7200 RPM disk speed or better (our experience is that laptops tend to have slow disks to save power)
•24-inch (61 cm) screen
•It is important to not run other programs at the same time as MxVDev.
•Measurement I/O devices have better response times if they are in a PCIe slot than if they are connected over USB.