Troubleshooting TestCases

Signal Not Connected

TestCase_NotConnected

A yellow warning icon indicates the Signal in a TestCase is not connected to the Harness. Use this procedure to troubleshoot the problem:

1.Disconnect then reconnect the Harness.

2.If this does not fix the problem, open MxTransIt and find the Transform you are connecting to.

3.Check if all the Signals in the TestCase are on the Transform and the names match exactly.

4.Check if the ports are exported. You can use the Exports tab.

5.Save the Harness.

6.In MxVDev, click Yes on the reload dialog.

GST_Reload

7.Use the Connecting Signals dialog.